- The components of the new equipment have not been run-in yet, and there may be Karton. When the operator first uses the equipment, he needs to raise the temperature. First, he needs to raise the temperature to pull the motor triangle belt by hand until he is comfortable. Then he can connect and pull the motor 8-10 times according to the normal working options and gradually raise the temperature, which takes about 40-50 minutes.
- In addition to the preliminary temperature regulation, the organic fertilizer equipment needs to continue to heat up and supplement heat after starting up. At the same time, according to the different nature of the material, it should be adjusted to different temperatures.
- When the bearings at both ends of the main engine bearing room are hot or noisy, stop the machine for maintenance and add butter. When working normally, the bearing room is every 5-6 days. Add butter once.
- Pay attention to find out the operating rules of the machine; for example, the machine temperature is high or low, the speed is fast or slow, and can be handled in time according to the situation.
- When the fuselage of the organic fertilizer granulator is unstable, attention should be paid to check whether the gap between the coupling and the anastomosis is too tight, and to adjust and loosen it in time.
- When the machine stops, the operator should completely cut off the power supply and remove the parts of the machine head with wrench, and wait for the next time to preheat separately before use.
What should be paid attention to in the process of using granulator?
已发布
tiancimachine.com 